ProXMask
Bacterial Filtration Efficiency or BFE is a measurement of a respirator best material‘s resistance to penetration of bacteria. Results are reported as percent efficiency and correlate with the ability of the fabric to resist bacterial penetration. Higher numbers in this test indicate better barrier efficiency.
* Antiviral feature only available for ProXmask 90V & 95V.
PROX™ technology strikes a balance between protection and comfort. Breathability of a face mask is the key factor of comfort. Well designed air permeable fabric structures contribute to a state of equilibrium between protection and comfort. Carbon dioxide content in inhalation and breathing resistance values comply well with international face mask effectiveness standards.
Measure from ear to ear through the tip of your nose, and match your measurements accordingly.
The table server as sizing guidelines. Do take your measurement to determine your most accurate size. Due to various measurement methods, please allow +/- 0.5cm difference.
ProXmask™ has passed the flammability, carbon dioxide (CO2) content and breathing resistance test conducted at the National Institute of Occupational Safety and Health (NIOSH), Malaysia as per Europeans standards. A full biocompatibility testing, according to ISO 10993-1 was performed to exclude any potential safety issue. A human patch dermatological testing was similarly performed, which demonstrated a perfect skin compatibility. An extractable study under dynamic airflow conditions showed that absolutely no substance was released.
A full biocompatibility testing, according to ISO 10993-1 was performed to exclude any potential safety issue. A human patch dermatological testing was similarly performed, which demonstrated a perfect skin compatibility. An extractable study under dynamic airflow conditions showed that absolutely no substance was released.
Click here for more info in Test Report.
For optimal protection, the following instruction should be followed each time the face mask is worn.
1) Clean your hands before touching the mask.
2) Adjust the mask to fit your face without leaving gaps on the sides.
3) Make sure that the mask covers your mouth, nose and chin.
1) Wash the mask before use.
2) Wash the mask after use for hygiene purpose.
3) Hand wash with powder detergent for 3-5 minutes.
4) Leave to dry.
• Do not use bleach.
• Do not iron.
• Do not apply alcohol-based solutions.
• Hand wash durability up to 60 times; machine wash durability up to 20 times.
• This face mask does not eliminate illness, disease or infection and is designed for general public use.
• This face mask serves for virus protection and bacteria filtration, not intended for medical application.
• This face mask does not supply oxygen. Do not use in oxygen deficient atmospheres.
• Do not use the face mask for occupational safety use against harmful chemicals, gases, vapors, oil aerosols, oil based particles or extremely high particulate concentration.
• Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration as specified by the manufacturer.
• Follow fitting instructions carefully, filtration efficiency depends on proper fitting.
• Individuals with a compromised respiratory system, such as asthma or emphysema, should consult a physician and complete a medical evaluation prior to use.
• Not recommended for children below the age of 5.
• In case of discomfort or complication, please seek medical attention immediately.
Ⓒ 2021-2022 PROXMASK. ALL RIGHTS RESERVED
